Robotics Tutorials

This is a listing of robotics tutorials submitted by Robotics Society of Southern California members.

sort icon
Dual Sensors for a Stamp part II

by Jim Ubersetzig

This article was published in the April 1999 issue of The Robot Builder.

This is a follow-up to the article "Dual Sensors for a STAMP".

Introduction

Have you ever wanted to add sensors to your robot - but weren'...

DUAL SENSORS for a STAMP

by Jim Ubersetzig

This article was published in the March 1999 issue of the Robot Builder

 

Introduction

Have you ever wanted to add sensors to your robot - but weren't sure how to do it ? In this two-part article I will show you how to build a pair of inexpensive sensors which share a Basic Stamp 1 computer.

This...

Demonstration of Probabilistic Robotics

 

by Jef Mangelschots

During the March 2010 meeting of RSSCRainer Hessmer...

Basics of Soldering

by Arthur Ed LeBouthillier

This article appeared in the October 1999 issue of The Robot Builder

Soldering is the use of a low-melting point, conducting alloy in order to create a mechanical and electrical joint. Notice that there are two important connection aspects: mechanical AND electrical; a good solder joint provides both.

Solder is an alloy composed usually of tin and...

basic ideas of digital signal processing

By Arthur Ed LeBouthillier

This article was published in the December 1999 issue of The Robot Builder.

It’s no secret that computers are nearly everywhere. Although it’s not always obvious, they’re already embedded into everything from microwave ovens to toys. They’re inside your car, your radio, your digital camera and your calculator. It seems
that...