Robotics Tutorials
This is a listing of robotics tutorials submitted by Robotics Society of Southern California members.
 |
|
|---|---|
| Dual Sensors for a Stamp part II |
This article was published in the April 1999 issue of The Robot Builder. This is a follow-up to the article "Dual Sensors for a STAMP". IntroductionHave you ever wanted to add sensors to your robot - but weren'... |
| DUAL SENSORS for a STAMP |
by Jim Ubersetzig This article was published in the March 1999 issue of the Robot Builder.
IntroductionHave you ever wanted to add sensors to your robot - but weren't sure how to do it ? In this two-part article I will show you how to build a pair of inexpensive sensors which share a Basic Stamp 1 computer. This... |
| Demonstration of Probabilistic Robotics |
During the March 2010 meeting of RSSC, Rainer Hessmer... |
| Basics of Soldering |
by Arthur Ed LeBouthillier This article appeared in the October 1999 issue of The Robot Builder Soldering is the use of a low-melting point, conducting alloy in order to create a mechanical and electrical joint. Notice that there are two important connection aspects: mechanical AND electrical; a good solder joint provides both. Solder is an alloy composed usually of tin and... |
| basic ideas of digital signal processing |
By Arthur Ed LeBouthillier This article was published in the December 1999 issue of The Robot Builder.
It’s no secret that computers are nearly everywhere. Although it’s not always obvious, they’re already embedded into everything from microwave ovens to toys. They’re inside your car, your radio, your digital camera and your calculator. It seems |